K-Tech Electrical

B-TEC 300amp / 12v LiFePO4 Battery Gen2

Original price was: $3,294.76.Current price is: $2,919.00.

Specifications Normal Specification EPL-100BT-12V-SLIM EPL-125BT-12V G2 EPL-200BT-12V G2 EPL-300BT-12V G2 Nominal Voltage 12.8V Nominal Capacity 100Ah 125Ah 200Ah 300Ah Cycle Life (DOD – 80% under controlled conditions) ≥ 2000 Cycles Standard Charge Specification (Lithium profile charger required) Battery Charge Temperature 0 ̴ 45°C Normal Charge Voltage CV/CC* 14.20 ̴ 14.60V Standby (Float) Voltage 13.50 ̴ 13.80V Maximum Charge Current 80A @ 25˚C for 30mins 60A @ 25°C for 30mins 150A @ 25°C for 30mins 190A @ 25°C for 30mins Recommended Charge Current For Maximum Life, Charge in the lower amperage range 20~50A 20~60A 40~100A 60~120A Standard Discharge Specification Battery Discharge…

Description

B-TEC 300amp / 12v LiFePO4 Battery Gen2

Description

The G2 now incorporates a “Built-In Reset Button” making re-starting a flat battery a breeze. No longer do you need to apply a voltage to the battery terminals to wake up the battery. Press the button and within seconds, the battery will come back to life ready to accept a charge source to rejuvenate the battery.

The Enerdrive Enerdrive B-TEC G2 battery incorporates wireless Battery Monitoring Technology. By downloading the Android™ or Apple® app to your smartphone or tablet device, you can monitor the following information;

  •     Battery Capacity
  •     Battery Voltage
  •     Battery Current (Amps)
  •     Battery State of Charge (SOC)
  •     Battery State of Health (SOH)
  •     Battery Status
  •     Individual Cell Voltage
  •     Battery Temperature
  •     Battery Cycles
  •     Battery Alarms
  •     Battery Event Information

Battery Management System

The battery is also equipped with an internal Battery Management System that can monitor and optimise each Prismatic cell within the battery during normal operation. It will protect the battery pack from over charge, over discharge, over temperature & short circuit. The BMS helps to ensure safe and accurate operation of the battery.

This product is not suitable to mount anywhere with a possibility of being exposed to the elements. It is an electronic product designed for internal use ONLY

https://enerdrive.com.au/product/epower-b-tec-12v-300ah-g2-lithium-battery/

Additional information

Weight 38.2 kg
Dimensions 52.1 × 28 × 23.8 cm

Reviews

There are no reviews yet.

Be the first to review “B-TEC 300amp / 12v LiFePO4 Battery Gen2”

Your email address will not be published. Required fields are marked *